Differences

This shows you the differences between two versions of the page.

--- en:ost:ccds:maximdl [2026/03/09 13:07] – [Setup Tab] rhainich
+++ en:ost:ccds:maximdl [2026/03/09 13:30] (current) – [Maxim DL] rhainich
@@ Line 1: / Line 1: @@
 ====== Maxim DL ======
+/*
 <WRAP center round important 40%>
 Please note that this article is currently being updated.
 </WRAP>
+*/
 //Maxim DL// is currently the primary interface used to control the observatory, operate the cameras, and perform observations.
@@ Line 160: / Line 162: @@
 {{ ost:software:maximdl:maxim_dl_camera_control_setup_1_colored_2.jpg | Setup: filter wheel}}
+In the first step, select ''ASCOM'' from the **Filter or Controlling Camera Model** drop-down menu and click **Advanced...**. In the next window, select ''QHYCCD FilterWheel'' and click **Properties...** (Step 2). A driver settings window will open. These settings usually only need to be configured once. Select the **Number of Filter Slots** (in our case 9), define the filter names, and enter any required focus offsets (Step 3). Confirm and close all windows by clicking **OK**.
 <WRAP group>
 <WRAP third column>
-\\
+[{{ ost:software:maximdl:maxim_dl_camera_control_setup_filter_1_colored.jpg | Connecting the CFW-3 filter wheel - Step 1}}]
-\\
-In the first step, select ''ASCOM'' from the **Filter or Controlling Camera Model** drop-down menu and click **Advanced...**. In the next window, select ''QHYCCD FilterWheel'' and click **Properties...** (Step 2). A driver settings window will open. These settings usually only need to be configured once. Select the **Number of Filter Slots** (in our case 9), define the filter names, and enter any required focus offsets (Step 3). Confirm and close all windows by clicking **OK**.
 </WRAP>
 <WRAP third column>
-[{{ ost:software:maximdl:maxim_dl_camera_control_setup_filter_1_colored.jpg | Connecting the CFW-3 filter wheel - Step 1}}]
-\\
 [{{ ost:software:maximdl:observatory_control_setup_fw_2.png | Connecting the CFW-3 filter wheel - Step 2}}]
 </WRAP>