| Both sides previous revision Previous revision Next revision | Previous revision |
| en:ost:ccds:ccdops [2016/11/10 22:00] – [Setup] rhainich | en:ost:ccds:ccdops [2017/01/14 01:31] (current) – [Mounting and connecting to the computer] rhainich |
|---|
| [{{:ost:ccds:ccdops:ccdops_cameralink.jpg|connected}}] | [{{:ost:ccds:ccdops:ccdops_cameralink.jpg|connected}}] |
| |
| | \\ |
| \\ | \\ |
| \\ | \\ |
| </WRAP> | </WRAP> |
| <WRAP half column> | <WRAP half column> |
| [{{ ost:ccds:ccdops:self_guide_image.jpg | Tracking box with a guide star }}] | [{{ ost:ccds:self_guide_image.jpg | Tracking box with a guide star }}] |
| </WRAP> | </WRAP> |
| </WRAP> | </WRAP> |
| In the following window one can set the exposure time and the CCD to use. Additionally, one can activate the (debug) log. Furthermore, it is recommend to activate the option //**Calibrate from Corner**// as this gives better results. | In the following window one can set the exposure time and the CCD to use. Additionally, one can activate the (debug) log. Furthermore, it is recommend to activate the option //**Calibrate from Corner**// as this gives better results. |
| |
| [{{ ost:ccds:ao_calibrate_menu.jpg |Calibration menue of the AO-7}}] | [{{ ost:ccds:ccdops:ao_calibrate_menu.jpg |Calibration menue of the AO-7}}] |
| |
| The following image depicts the result of the calibration (very similar to the "normal guiding"), which in this case is (qualitatively) somewhere between the typical and optimal calibration result of the AO-7. In principle, the same criteria as described above for the "normal" guiding apply here. | The following image depicts the result of the calibration (very similar to the "normal guiding"), which in this case is (qualitatively) somewhere between the typical and optimal calibration result of the AO-7. In principle, the same criteria as described above for the "normal" guiding apply here. |
| |
| |
| [{{ ost:ccds:ao_calibration_results.jpg | Calibration results of the AO-7 }}] | [{{ ost:ccds:ccdops:ao_calibration_results.jpg | Calibration results of the AO-7 }}] |
| |
| ==== Self Guiding ==== | ==== Self Guiding ==== |
| After clicking the ''OK'' button an exposure with the selected CCD is taken and shown along with the status menu (see the figure below). Select the guide star by moving the selection box on it and start the tracking process by clicking the ''Resume'' button. | After clicking the ''OK'' button an exposure with the selected CCD is taken and shown along with the status menu (see the figure below). Select the guide star by moving the selection box on it and start the tracking process by clicking the ''Resume'' button. |
| |
| [{{ ost:ccds:ao_self_guide.jpg |Self-guide status menu}}] | [{{ ost:ccds:ccdops:ao_self_guide.jpg |Self-guide status menu}}] |
| |
| This status menu presents some details, e.g. on the //**Guide Rate**//, which is the rate of corrections applied by the AO-7. Usually, the higher that value is, the better is the guiding. This can be reached by either by shorter exposure times or a smaller tracking box. The //**AO Position**// gives the deviation from the neutral position (50% x 50%) of the mirror. The //**RMS Wander**// is a measure for the efficiency of the guiding (smaller values are better), so try to reduce this value. //**Total Counts**// is the number of integrated counts of the tracking box (current and starting value). If //**Adaptive Gain**// has been activated in the setup menu, //**Adapt. Gain**// shows the applied amplification factor. | This status menu presents some details, e.g. on the //**Guide Rate**//, which is the rate of corrections applied by the AO-7. Usually, the higher that value is, the better is the guiding. This can be reached by either by shorter exposure times or a smaller tracking box. The //**AO Position**// gives the deviation from the neutral position (50% x 50%) of the mirror. The //**RMS Wander**// is a measure for the efficiency of the guiding (smaller values are better), so try to reduce this value. //**Total Counts**// is the number of integrated counts of the tracking box (current and starting value). If //**Adaptive Gain**// has been activated in the setup menu, //**Adapt. Gain**// shows the applied amplification factor. |