Differences

This shows you the differences between two versions of the page.

--- en:ost:telescope:c8_bedienung [2018/01/26 14:02] – rhainich
+++ en:ost:telescope:c8_bedienung [2024/02/20 09:41] (current) – [Additional documentation] rhainich
@@ Line 1: / Line 1: @@
-FIXME **This page is not fully translated, yet. Please help completing the translation.**\\ //(remove this paragraph once the translation is finished)//
+====== Celestron Advanced GT ======
-===== C8 (Under construction) =====
+The Celestron Advanced GT mount is our entry-level mount, primarily used with the C8 and [[en:osst| OSST (Coronado Hα Solar Telescope)]]. With a payload capacity of up to 12kg, it can also carry a number of other telescopes and cameras. However, it is only equipped with a mount for the Vixen prism rails.
+In terms of type, it is a computer-controlled equatorial system suitable for both visual observations and astrophotography. Thanks to its compact design, it can be easily set up by a single person.
-The Celestron 8 (C8) is our smallest telescope not accounting for binoculars or finderscopes. The telescope is usually attached to a Celestron Advanced GT mount, which can be can be set up by a single person because of its compact construction.
+===== Assembly =====
-==== Assembly ====
 In the following the setup of this telescope and the mount will be explained step by step:
@@ Line 22: / Line 20: @@
 ^ 10    | Before using the telescope you have to tare the rotation axes. First lose the clutch knobs fixing the right-ascension axis, until you can freely move the telescope around this axis. Now adjust the position of the counterweight such that there is no movement along this axis anymore. Tighten the clutch knobs again and repeat this procedure for the declination axis. As there are no counterweights for this axis, one has to shift the tube along the clamp to tare the declination axis.    |   {{ost:c8:IMG_7108_small.jpg?300}}  | {{ost:c8:011_resize.jpg?300}}  |
 ^ 11    | Afterwards the axes need to be justified. To do this, they need to be move to the index positions as illustrated in the image.   |  {{ost:c8:IMG_7122_small.jpg?300}} {{ost:c8:IMG_7124_small.jpg?300}}  |  {{ost:c8:011_resize.jpg?300}}  |
-^ 12    | Now the alignment can be performed. This procedure is very similar to the one of our  [[en:ost:telescope:c11_bedienung#alignment|C11]] with the exception that the mount will not automatically move to the index positions but fortunately you already did this in the step before.  |    |  {{ost:c8:011_resize.jpg?300}}  |
+^ 12    | Now the alignment can be performed. This procedure is very similar to the one of our  [[en:ost:telescope:c11_bedienung#alignment|CGE-PRO]] with the exception that the mount will not automatically move to the index positions but fortunately you already did this in the step before.  |    |  {{ost:c8:011_resize.jpg?300}}  |
 ^ 13    | Finished!  |    | {{ ost:c8:build_c8.gif }}  |
+===== Functions such as Hibernation =====
+The operation of the Advanced GT as well as features like hibernation do not differ from the [[en:ost:telescope:c11_bedienung#alignment|CGE-Pro]].
+===== Troubleshooting =====
+Known error sources and their solutions can be found [[en:ost:telescope:probleme#c11_und_cge-pro_montierung|here]].
+===== Additional documentation =====
+More details on the Celestron Advanced GT can be found in the corresponding manuals in the lab course room.