Differences

This shows you the differences between two versions of the page.

--- en:ost:telescope:c11_bedienung [2017/10/21 22:03] – rhainich
+++ en:ost:telescope:c11_bedienung [2024/02/20 09:07] (current) – rhainich
@@ Line 1: / Line 1: @@
-/*
+====== CGE PRO ======
-<WRAP center round important 40%>
-**Work in progress!**
-</WRAP>
-FIXME **This page is not fully translated, yet. Please help completing the translation.**\\ //(remove this paragraph once the translation is finished)//
+<WRAP group>
-*/
+<WRAP half column>
+Celestron's CGE PRO is a rugged, computer-controlled German equatorial mount suitable for both astrophotography and visual observation. With a generous payload capacity of up to 41kg, it can effectively accommodate large telescopes and heavy imaging equipment. The precision gears and motors allow for accurate tracking and alignment, although our model is getting older and no longer achieves such high precision. With autoguiding support, however, this is not noticeable.
+In addition, features such as the All-Star Polar Alignment and accessories such as the NexStar+ hand control and StarSense AutoAlign module allow the mount to be set up and aligned efficiently.
-====== C11 & CGE PRO ======
+===== Individual parts =====
-The C11 is our second largest telescope and suitable for mobile use. Every time one likes to use it, one has to put it up again from scratch. The purpose of this article is to describe the details of this process.
-===== Scattered pieces =====
-To protect the sensitive electronics from humidity and other harsh weather conditions they are stored in the lab course room. The remaining mechanical parts stay in the dome, so that one does not need to carry them around.
+To protect the sensitive electronics from humidity and other harsh weather conditions they are stored in the lab course room.
 === Stored in the dome: ===
-  - the tripod
+  - the tubes (C11, RASA)
-  - the tube (C11)
   - counterweights + bar
 === Stored in lab course room: ===
+  - the tripop
   - the CGE PROs electronic box
   - the CGE PRO mount
   - a box containing all 1.4″ eyepieces and the corresponding filters
   - sun filters
+</WRAP>
+<WRAP half column>
+[{{ost:c11:cge-pro_c11.jpg | CGE PRO mit C11}}]
+</WRAP>
+</WRAP>
 ===== Setup =====
@@ Line 197: / Line 197: @@
 ===== Additional documentation =====
-More details on the CGE PRO and the C11 can be found in the corresponding manuals in the lab course room.
+More details on the CGE PRO can be found in the corresponding manuals in the lab course room.