This is an old revision of the document!
CCDs Setup
STF-8300M
ST-8/7
Assembling the filter wheel
The goal of this task is to mount or dismount the filter wheel to the CCD. The operation is demonstrated by the following pictures of the ST-8. The procedure in short:
- Open the camera. Loose the screws from the cover, see Figure 1.
- Open the case of the filter wheel and mount the empty cover of the filter wheel to the CCD, see Figure 2.
- Now attach the filter wheel and the case of the adaptive optics module (AO), see Figure 3.
- Attach the deflecting mirror and AO case, see Figure 4.
- Connect the cables for:
- The AO control (flat ribbon cable)
- The power supply
- Ready
<columns 100% 33% 33% 33%>
<newcolumn>
<newcolumn>
</columns>
<columns 100% 33% 33% 33%>
<newcolumn>
<newcolumn>
</columns>