Differences

This shows you the differences between two versions of the page.

--- en:ost:ccds:setup [2016/10/24 00:10] – [Assembling the filter wheel and the OAG] rhainich
+++ en:ost:ccds:setup [2021/03/31 07:53] (current) – [STF-8300M] rhainich
@@ Line 1: / Line 1: @@
 ====== CCDs Setup ======
+===== QHY600M =====
+   * will follow soon ...
 ===== STF-8300M =====
@@ Line 6: / Line 9: @@
 ==== First light ====
-<WRAP group>
+<WRAP group 70%>
 <WRAP half column>
 [{{ :ost:ccds:windradani_small.gif?nocache |Wind turbines near Golm}}]
@@ Line 32: / Line 35: @@
 <WRAP group>
 <WRAP third column>
-[{{ :ost:ccds:stf8300_cover.jpg?300 | 1. Cover of the STF-8300 }}]
+[{{ :ost:ccds:stf8300_cover.jpg?265 | 1. Cover of the STF-8300 }}]
 </WRAP>
 <WRAP third column>
-[{{ :ost:ccds:stf8300_filter_wheel.jpg?300 | 2. Backplate of the filter wheel mounted to the SFT-8300 (the red circles mark the corresponding screws, the blue circle marks the sensor for the filter wheel position)}}]
+[{{ :ost:ccds:stf8300_filter_wheel.jpg?265 | 2. Backplate of the filter wheel mounted to the SFT-8300 (the red circles mark the corresponding screws, the blue circle marks the sensor for the filter wheel position)}}]
 </WRAP>
 <WRAP third column>
-[{{ :ost:ccds:stf8300_filter_wheel_2.jpg?300 | 3. Filter holder with filters and spacer rings}}]
+[{{ :ost:ccds:stf8300_filter_wheel_2.jpg?265 | 3. Filter holder with filters and spacer rings}}]
 </WRAP>
 </WRAP>
@@ Line 45: / Line 48: @@
 <WRAP group>
 <WRAP third column>
-[{{ :ost:ccds:stf8300_filter_wheel_3.jpg?300 | 4. Filter wheel with inserted filter holder (the red circles mark the screws that attach the cover to the filter holder, the blue circles mark the screws that attach the filter holder to the backplate of the filter wheel)}}]
+[{{ :ost:ccds:stf8300_filter_wheel_3.jpg?265 | 4. Filter wheel with inserted filter holder (the red circles mark the screws that attach the cover to the filter holder, the blue circles mark the screws that attach the filter holder to the backplate of the filter wheel)}}]
 </WRAP>
 <WRAP third column>
-[{{ :ost:ccds:stf8300_filter_wheel_4.jpg?300 | 5. Filter wheel with the cover}}]
+[{{ :ost:ccds:stf8300_filter_wheel_4.jpg?265 | 5. Filter wheel with the cover}}]
 </WRAP>
 <WRAP third column>
-[{{ :ost:ccds:stf8300_oag_1.jpg?300 | 6. Filter wheel with the OAG}}]
+[{{ :ost:ccds:stf8300_oag_1.jpg?265 | 6. Filter wheel with the OAG}}]
 </WRAP>
 </WRAP>
@@ Line 58: / Line 61: @@
 <WRAP group>
 <WRAP third column>
-[{{ :ost:ccds:stf8300_oag_2.jpg?300 | 7. Filter wheel with the OAG and T2 adapter}}]
+[{{ :ost:ccds:stf8300_oag_2.jpg?265 | 7. Filter wheel with the OAG and T2 adapter}}]
 </WRAP>
 <WRAP third column>
-[{{ :ost:ccds:stf8300_side.jpg?300 | 8. Side view of the STF-8300}}]
+[{{ :ost:ccds:stf8300_side.jpg?265 | 8. Side view of the STF-8300}}]
 </WRAP>
 <WRAP third column>
-[{{ :ost:ccds:stf8300_complete.jpg?300 | 9. STF-8300 with filter wheel, OAG, and ST-i}}]
+[{{ :ost:ccds:stf8300_complete.jpg?265 | 9. STF-8300 with filter wheel, OAG, and ST-i}}]
 </WRAP>
 </WRAP>
@@ Line 73: / Line 76: @@
 ==== Assembling the filter wheel ====
-The goal of this task is to mount or dismount the filter wheel to the CCD. The operation is demonstrated by the following pictures of the ST-8. The procedure in short:
+The goal of this task is to mount or dismount the filter wheel to the ST-7 of ST-8. The operation is demonstrated by the following pictures of the ST-8. The procedure in short:
-  - Open the camera. Loose the screws from the cover, see Figure 1.
+  - open the camera by loosing the screws from the cover, see Figure 1.
-  - Open the case of the filter wheel and mount the empty cover of the filter wheel to the CCD, see Figure 2.
+  - open the case of the filter wheel and mount the empty cover of the filter wheel to the CCD, see Figure 2.
-  - Now attach the filter wheel and the case of the adaptive optics module (AO), see Figure 3.
+  - now attach the filter wheel and the case of the adaptive optics module (AO), see Figure 3.
-  - Attach the deflecting mirror and AO case, see Figure 4.
+  - attach the deflecting mirror and AO, see Figure 4.
-  - Connect the cables for:
+  - connect the cables for:
-    * The AO control (flat ribbon cable)
+    * the AO control (flat ribbon cable)
-    * The power supply
+    * the power supply
-  - Ready :-)
+  - READY :-)
-<columns 100% 33% 33% 33%>
+<WRAP group>
-[{{ :ost:ccds:st8_open_lid.jpg?300 |1: ST8 and cover}}]
+<WRAP third column>
+[{{ :ost:ccds:st8_open_lid.jpg?265 |1: ST8 and cover}}]
+</WRAP>
+<WRAP third column>
+[{{ :ost:ccds:fw_screws_2.jpg?265 |3: Screw positions on the filter-wheel backplate (green circles) and the AO case (red circles)}}]
+</WRAP>
+<WRAP third column>
+[{{ :ost:ccds:fw_st8_ports.jpg?265 |5: ST-8 with the cable connections}}]
+</WRAP>
+</WRAP>
-<newcolumn>
-[{{ :ost:ccds:fw_screws_2.jpg?300 |3: Mount the filter wheel}}]
-<newcolumn>
+<WRAP group>
-[{{ :ost:ccds:fw_st8_ports.jpg?300 |5: Connect the cables}}]
+<WRAP third column>
+[{{ :ost:ccds:fw_case.jpg?265 |2: ST-8 with the attached filter-wheel case}}]
-</columns>
+</WRAP>
+<WRAP third column>
+[{{ :ost:ccds:fw_screws_1.jpg?265 |4: Adaptive optics module}}]
+</WRAP>
-<columns 100% 33% 33% 33%>
+<WRAP third column>
-[{{ :ost:ccds:fw_case.jpg?300 |2: Case and filter wheel}}]
+[{{ :ost:ccds:fw_and_st8.jpg?265 |6: Assembled camera}}]
+</WRAP>
-<newcolumn>
+</WRAP>
-[{{ :ost:ccds:fw_screws_1.jpg?300 |4: Adaptive Optics}}]
-<newcolumn>
-[{{ :ost:ccds:fw_and_st8.jpg?300 |6: Complete}}]
-</columns>