en:ost:ccds:maximdl [OST Wiki]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Maxim DL ======

//Maxim DL// is currently the main interface for controlling the observatory and cameras as well as for performing the observations.

===== Interface und grundlegende Bedienung =====

//Maxim DL// can be started most easily by double-clicking on the icon ''Maxim DL 6'' on the desktop or via the taskbar.  

==== Main window ====

<WRAP group>
<WRAP third column>

In the picture on the left or below, which shows the main window of //Maxim DL//, the most important buttons are highlighted. The red button opens the **Observatory Panel**, which contains the controls for the dome and the telescope. The green button opens the **Camera Control Panel**, which provides the controls for the cameras. These two windows will be discussed in detail below.

{{ ost:software:maximdl:maximdl_buttons_2.png | Maxim DL buttons}}

The blue, pink, and brown buttons can be used to display information about the captured images. The header information can be called up via the brown button, while the blue button allows, for example, to display the counts in the individual pixels or in a certain aperture. The pink one makes simple image scaling controls accessible. 

</WRAP>
<WRAP twothirds column>
[{{ ost:software:maximdl:maximdl_main.png | Main window of Maxim DL}}]
</WRAP>
</WRAP>

==== Observatory Panel ====

The **Observatory** control window has different tabs to control the different parts of the observatory. You can move to objects by entering their coordinates, selecting them from a catalog or marking them on an all-sky map. The dome can be opened, closed, and if necessary moved manually. Furthermore, the telescope can be moved manually via this control window and parked again after the observations are finished.

=== Setup tab ===
The setup tab is used to establish the connection to the telescope, the dome, and the focuser. You can click on the **Connect** button behind the respective entry or on **Connect All** to establish the connection to all components simultaneously. All other entries like **Rotator** are not relevant for us. 
 
<WRAP group>
<WRAP half column>
[{{ ost:software:maximdl:observatory_control_setup_1.png | Setup tab - Nothing connected }}]
</WRAP>
<WRAP half column>
[{{ ost:software:maximdl:observatory_control_setup_2.png | Setup tab - Telescope, dome, and focuser connected }}]
</WRAP>
</WRAP>

In order to disconnect the devices after the observation, you can click on the individual **Disconnect** buttons or on **Disconnect All**. 

=== Dome tab ===

The **Open** and **Close** buttons can be used to open and close the dome. The dome always opens or closes completely. It must be ensured that the **Slave Dome To Scope** option is activated, otherwise the dome will not follow the telescope. Unfortunately, this option turns off every time the dome is opened, closed, or the telescope is parked. 

<WRAP group>
<WRAP half column>
[{{ ost:software:maximdl:observatory_control_dome_1.png | Dome closed }}]
</WRAP>
<WRAP half column>
[{{ ost:software:maximdl:observatory_control_dome_3.png | Dome open }}]
</WRAP>
</WRAP>

The dome can be moved manually via the functions in the **Position** box. This is especially useful when the telescope and the slit are not correctly aligned and the dome needs to be recalibrated. On the example shown above, the alignment is not optimal but still so good that the telescope does not look at the dome.

=== Telescope tab ===

The telescope tab shows in the upper left area where the telescope is currently looking and which action it is currently performing. The right ascension and declination are displayed for the current date as well as for the standard epoch J2000. Furthermore, the altitude above the horizon and the azimuth are displayed. In the example shown below, the telescope is tracking and apart from that is inactive.

{{ ost:software:maximdl:observatory_control_telescope_1.png | Telescope tab }}

The buttons in the **Nudge** section can be used to move the telescope manually, with the step size selected via the drop-down menus. Each movement can again be aborted via the **Abort** button.

In the **Target Coordinates** area you can enter the right ascension and declination of an object and slew to it via the **Go To** button. The **Zoom To** button switches to the Zoom tab, which displays a map of the sky at the respective coordinates. 

The **Park** button in the **Mount** area can be used to park the telescope after the observation. 

=== Catalog tab ===

Using the Catalog tab, the built-in catalogs can be searched for objects. To do this, first select a category from the **Category** drop-down menu. You can choose between ''Stars'', ''Deep Space'' and ''Solar System''. From the drop-down menu **Object ID** either the object directly or a catalog can be selected. In the latter case the catalog number of the object, or only a part of it, can be entered (see example below). After a click on **Search** a list of possible objects is displayed. The desired object can be selected from this list. With a click on **Go To** the object is approached.

{{ ost:software:maximdl:observatory_control_catalog_1.png | Catalog tab}}

=== Zoom tab ===

In the zoom tab, the sky map around the selected object is displayed. Via the option button (arrow) on the right and via the context menu, many options are accessible, such as the zoom level. If one clicks with the right mouse button on any point of the map, one can slew the telescope to this point via ''Slew to Mouse Position''.  If you click on an object, it can be selected directly. In the example below the corresponding option is ''Slew tp 119 Tau''.

<WRAP group>
<WRAP half column>
{{ ost:software:maximdl:observatory_control_zoom_1.png | Ohne Kontextmenü }}
</WRAP>
<WRAP half column>
{{ ost:software:maximdl:observatory_control_zoom_2.png | Mit Kontextmenü }}
</WRAP>
</WRAP>

=== All Sky tab ===

The All Sky tab shows the current sky. By right-clicking, you can zoom into any area. When you do that you will be redirected to the zoom tab. The option button (arrow) on the right provides access to many setting options.  

{{ ost:software:maximdl:observatory_control_all_sky_1.png | All Sky tab}}


==== Camera Panel ====

The **Camera Control** window can be used to control the cameras and take the images. 

=== Setup tab ===

As the name suggests, this window is used to connect the cameras to Maxim DL. This is done slightly differently for each camera manufacturer. Here, we will discuss the procedure for QHYCCD cameras and for SBIG cameras, since these are the cameras we primarily use. For each camera model, the appropriate driver must be selected. This must be done for the actual camera as well as for the filter wheel. If a guiding camera is to be used, it must also be connected here. Normally the guiding camera is connected as **Camera 2**, while the main camera is connected as **Camera 1**.

{{ ost:software:maximdl:camera_control_setup_1.png | Setup tb}}

The first thing to do, regardless of the manufacturer, is to click on **Setup Camera**.

**Connecting QHYCCD cameras:**

In the window that opens, select ''ASCOM'' from the **Camera Model** drop-down menu and then click **Advanced...** (step 1). After that another window will open. In this window, select ''QHYCCD-Cameras-Capture'' from the dropdown menu and click on **Properties...** (step 2). After that, the settings menu for the **ASCOM** driver for the QHYCCD cameras opens. **ASCOM** is the basic interface through which many of the observatory's operations are controlled. 

<WRAP group>
<WRAP third column>
[{{ ost:software:maximdl:camera_control_setup_qhy600m_1.png | Connecting the QHY600M - Step 1}}]
</WRAP>
<WRAP third column>
[{{ ost:software:maximdl:camera_control_setup_qhy600m_2.png | Connecting the QHY600M - Step 2}}]
</WRAP>
<WRAP third column>
[{{ ost:software:maximdl:camera_control_setup_qhy600m_3.png | Connecting the QHY600M - Step 3}}]
</WRAP>
</WRAP>

In the last step (3) all important settings for the **ASCOM** driver can now be configured. These include the readout mode, which can be selected from the **ReadMode** drop-down menu. The following can be selected: ''PhotoGraphic DSO 16bit'', ''High Gain Mode 16bit'', ''Extend Fullwell Mode'' and ''Extend Fullwell 2CMS''. Under **Gain/Offset Setting** the **Gain** and **Offset** can then be set. These settings can be saved as **Preset**. In addition, the **Remove Overscan Area** option should also be activated for scientific images. Afterwards, all three windows can be closed by clicking **OK**. 

**Connecting QHYCCD filter wheels:**

To connect a filter wheel, first click on **Setup Filter**.

{{ ost:software:maximdl:camera_control_setup_6.png | Setup: filter wheel}}

<WRAP group>
<WRAP third column>
[{{ ost:software:maximdl:observatory_control_setup_fw_1.png | Connecting the CFW-3 filter wheel - Step 1}}]
\\
[{{ ost:software:maximdl:observatory_control_setup_fw_2.png | Connecting the CFW-3 filter wheel - Step 2}}]
</WRAP>
<WRAP third column>
\\
\\
In the first step you have to select ''ASCOM'' from the dropdown menu **Filter or Controlling Camera Model**. Then click on **Advanced...**. In the window that opens, select ''QHYCCD FilterWheel'' from the drop-down menu and then click **Properties...** (step 2). Thereupon another window opens, which shows the possible driver settings. The settings in this window usually have to be made only once. You have to select the **Number of Filter Slots** (in our case 9) and the respective filter names as well as any corrections for the focus (step 3). Afterwards all three windows have to be confirmed and closed by clicking **OK**.
</WRAP>
<WRAP third column>
[{{ ost:software:maximdl:observatory_control_setup_fw_3.png | Connecting the CFW-3 filter wheel - Step 3}}]
</WRAP>
</WRAP>

**Connecting SBIG cameras:**

Still to come...

**Connecting SBIG filter wheels:**

Still to come...

**Final Step:**

Now **Connect** has to be clicked. Then the cooling can be activated under **Coolers** and the target temperature can be set under **Cooler**. 

{{ ost:software:maximdl:camera_control_setup_2.png | Setup tab}}


=== Expose tab ===

In this tab you will find, on a small space, the most important settings regarding the recording of the images. Predefined setting sets can be found under **Exposure Preset**, where new ones can also be created. The most important setting is the exposure time (**Seconds**). To the right of this is the status information line, which shows what the camera is currently doing. In the example below the camera is idle. 

The filters can be found under **Filter Wheel**. The binning options are accessible via the two drop-down menus **X Binning** and **Y Binning**.  Furthermore, the readout mode (**Readout Mode**) can be selected, which is important for the QHY600M. The basic operation modes are **Single**, **Continuous**, and **Autosave**. In the first mode only a single exposure is made, whereas in the last one entire [[en:ost:ccds:maximdl_series|exposure series]] can be made. In the **Continuous** mode, images are created and displayed one after the other. This mode is particularly suitable for [[en:ost:fokus_new|focusing]]. In the corresponding article, we also go into more detail about the lower three panels. Further options are accessible via **Options** (arrow button). 

{{ ost:software:maximdl:camera_control_expose_1.png | Expose tab}}

=== Guide tab ===

The Guide tab contains the most important settings for guiding the telescope. We will go into details in a [[en:ost:ccds:guiding|guiding how-to]].

{{ ost:software:maximdl:camera_control_guiding_1.png | Guide tab}}


==== Screen Stretch Panel ====

Via the **Screen Stretch Panel** the scaling of the images can be influenced. In the first image below, which shows M42, the scaling is set to ''Low''. By increasing the scaling to ''Medium'' you will see much more details of M42. Many other helpful predefined scalings can be selected from the corresponding dropdown menu. 

<WRAP group>
<WRAP third column>
[{{ ost:software:maximdl:screen_stretch_1.png | Screen Stretch - ''Low'' scaling}}]
</WRAP>
<WRAP third column>
[{{ ost:software:maximdl:screen_stretch_2.png | Screen Stretch - ''Medium'' scaling}}]
</WRAP>
<WRAP third column>
[{{ ost:software:maximdl:screen_stretch_3.png | Screen Stretch - Histogram zoom}}]
</WRAP>
</WRAP>

Clicking on the plus symbol in the upper right section of the panel zooms into the histogram shown in the upper left section. This allows you to fine-tune the scaling via the red and green triangles, where the red triangle defines the black level and the green triangle the white level. The same can be achieved using the **Minimum** and **Maximum** fields.


==== Information Panel ====

The **Information Panel** is especially helpful to check if the image is overexposed and to find out which stars this may be due to. Here the values **Pixel** and **Maximum** are especially interesting for us. In the default ''Aperture'' mode the information is read from the cyan aperture shown on the image, which can be shifted e.g. to a bright star. If this is done, the signal-to-noise ratio (**SNR**) and the full-width-half-maximum (**FWHM**) are of interest as well. For our mostly uncalibrated images, values like the **Magnitude** are not relevant. 

{{ ost:software:maximdl:information_image_panel_1.png | Information Panel}}